SuperTstore

0.0 (0)

Cisco AIR-AP1832I-S-K9 (802.11ac Wave 2; 3x3:2SS; Int Ant; S Reg Domain)

16%
19,900.00
฿ 16,890.00

ฟรี

ได้รับภายใน : 31 มี.ค. ~ 02 เม.ย., 2024

สามารถเก็บเงินปลายทางได้

การรับประกัน

การรับประกัน : มีการรับประกัน 1 ปี

คืนสินค้าภายใน 15 วัน

คุณสมบัติทั่วไป
คำอธิบายสินค้า
รายละเอียดสินค้า
คะแนนและรีวิว
Q & A
คุณสมบัติทั่วไป
สิ่งที่ให้มาในกล่อง Cisco AIR-AP1832I-S-K9 (802.11ac Wave 2; 3x3:2SS; Int Ant; S Reg Domain) MODEL
การรับประกัน รับประกันโดยร้านผู้จัดจำหน่าย ระยะเวลาการรับประกัน 1 year
คำอธิบายสินค้า

good product

good quality

good system

รายละเอียดสินค้า

Cisco AIR-AP1832I-S-K9 802.11ac Wave 2; 3x3:2SS; Int Ant; S Reg Domain

Software8.1 MR1 or later for the Cisco Aironet 1830 Series Access Points
DeploymentModes:
Centralized, standalone, sniffer, Cisco FlexConnect

Standalone mode supported via Cisco Mobility Express with controller function running on the access point

802.11nVersion 2 and Related Capabilities:
3 x 3 MIMO with two spatial streams
Maximal ratio combining (MRC)
20 and 40 MHz channels
PHY data rates up to 300 Mbps (40 MHz with 5 GHz)
Packet Aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
802.11 dynamic frequency selection (DFS)
Cyclic shift diversity (CSD) support
802.11acWave 1 and 2 Capabilities:
3 x 3 MIMO with two spatial streams, single-user or multiuser MIMO
MRC
802.11ac beamforming (transmit beamforming)
20, 40, and 80 MHz channels
PHY data rates up to 867 Mbps (80 MHz in 5 GHz)
Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
802.11 DFS
CSD support
Frequency Band and Operating Channels2.412 to 2.462 GHz; 11 channels
5.180 to 5.320 GHz; 8 channels
5.500 to 5.720 GHz; 12 channels
5.745 to 5.825 GHz; 5 channels
Nonoverlapping Channels2.4 GHz:
20 MHz @ 802.11b/g: 3
20 MHz @ 802.11n: 3

5.0 GHz:
20 MHz @ 802.11a: 25
20 MHz @ 802.11n: 25
40 MHz @ 802.11n: 12
20 MHz @ 802.11ac: 21
40 MHz @ 802.11ac: 12
80 MHz @ 802.11ac: 6
Max Transmit Power2.4 GHz:
802.11b/g: 22 dBm, 3 antennas
802.11n (HT20): 22 dBm, 3 antennas

5.0 GHz:
802.11a: 23 dBm, 3 antennas
802.11n (HT20/40): 23 dBm, 3 antennas
802.11ac (Non-HT80, VHT20/40/80: 23 dBm, 3 antennas

The maximum power setting will vary by channel and according to individual country regulations.

Available Total Transmit Power Settings2.4 GHz: 22 / 19 / 16 / 13 / 10 / 7 / 4 / 1 dBm
5.0 GHz: 23 / 20 / 17 / 14 / 11 / 8 / 5 / 2 dBm

The maximum power setting will vary by channel and according to individual country regulations.

Integrated Antenna2.4 GHz, gain 3 dBi, internal omni, horizontal beamwidth 360°
5.0 GHz, gain 5 dBi, internal omni, horizontal beamwidth 360°
Interfaces1 x 10/100/1000Base-T autosensing (RJ45), Power over Ethernet (PoE) Management console port (RJ45)
USB 2.0 (enabled via future software update)
IndicatorsStatus LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors
System Memory1 GB DRAM
256 MB flash
ComplianceSafety:
UL 60950-1
CAN/CSA-C22.2 No. 60950-1
UL 2043
IEC 60950-1
EN 60950-1

Radio Approvals:
FCC Part 15.247, 15.407
RSS-210 (Canada)
EN 300.328, EN 301.893 (Europe)
ARIB-STD 66 (Japan)
ARIB-STD T71 (Japan)
EMI and susceptibility (Class B)
FCC Part 15.107 and 15.109
ICES-003 (Canada)
VCCI (Japan)
EN 301.489-1 and -17 (Europe)
IEEE Standard:
IEEE 802.11a/b/g, IEEE 802.11n, IEEE 802.11h, IEEE 802.11d
IEEE 802.11ac Draft 5

Security:
802.11i, Wi-Fi Protected Access 2 (WPA2), WPA
802.1x
Advanced Encryption Standards (AES), Temporal Key Integrity Protocol (TKIP)

EAP Types:
Extensible Authentication Protocol-Transport Layer Security (EAP-TLS)
EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol Version 2 (MSCHAPv2)
Protected EAP (PEAP) v0 or EAP-MSCHAPv2
Extensible Authentication Protocol-Flexible Authentication via Secure Tunneling (EAP-FAST)
PEAPv1 or AP-Generic Token Card (GTC)
EAP-Subscriber Identity Module (SIM)

Multimedia:
Wi-Fi Multimedia (WMM)

Others:
FCC Bulletin OET-65C
RSS-102
Powering Options802.3af/802.3at
Enhanced PoE
Cisco local power supply, AIR-PWR-C
Cisco power injector, AIR-PWRINJ5 (supports 802.3af only)

If 802.3af is the source of power, the USB port is disabled

Input Power Requirements44 to 57 VDC
Power Supply and Power Injector: 100 to 240 VAC, 50 to 60 Hz
Power Draw16 W

When deployed using a PoE specification, the power drawn from the power sourcing equipment will be higher by some amount, depending on the length of the interconnecting cable

TemperatureNon-Operating Storage: -22 to 158°F (-30 to 70°C)
Non-Operating Storage Altitude Test: 77°F (25°C) at 15,000' (4,572 m)
Operating: 32 to 104°F (0 to 40°C)
Operating Humidity10 to 90% (non-condensing)
Altitude (Operating)104°F (40°C) @ 9,843' (3,000 m)
Dimensions (LxWxH)8.3 x 8.3 x 2.0" (21.1 x 21.1 x 5.1 cm)
Weight3.12 lb (1.41 kg)
คะแนนและรีวิว

0.0 / 5 ( 0 คะแนน )

ยังไม่มีรีวิว

Q & A

คุณมีคำถามเกี่ยวกับผลิตภัณฑ์นี้หรือไม่?

ผู้ขายจะตอบกลับโดยเร็วที่สุด

Cisco AIR-AP1832I-S-K9 (802.11ac Wave 2; 3x3:2SS; Int Ant; S Reg Domain)

19,900.00

฿ 16,890.00

ราคารวม
฿ 16,890.00
select-img

Cisco AIR-AP1832I-S-K9 (802.11ac Wave 2; 3x3:2SS; Int Ant; S Reg Domain)

16,890 19,900